amroc/weno/StatParser/StatParser_scanner.c File Reference

#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>

Classes

struct  yy_buffer_state
struct  yy_trans_info

Defines

#define YY_INT_ALIGNED   short int
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION   2
#define YY_FLEX_MINOR_VERSION   5
#define YY_FLEX_SUBMINOR_VERSION   33
#define INT16_MIN   (-32767-1)
#define INT32_MIN   (-2147483647-1)
#define INT8_MAX   (127)
#define INT16_MAX   (32767)
#define INT32_MAX   (2147483647)
#define UINT8_MAX   (255U)
#define UINT16_MAX   (65535U)
#define UINT32_MAX   (4294967295U)
#define yyconst
#define YY_NULL   0
#define YY_SC_TO_UI(c)   ((unsigned int) (unsigned char) c)
#define BEGIN   (yy_start) = 1 + 2 *
#define YY_START   (((yy_start) - 1) / 2)
#define YYSTATE   YY_START
#define YY_STATE_EOF(state)   (YY_END_OF_BUFFER + state + 1)
#define YY_NEW_FILE   statrestart(statin )
#define YY_END_OF_BUFFER_CHAR   0
#define YY_BUF_SIZE   16384
#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
#define YY_TYPEDEF_YY_BUFFER_STATE
#define EOB_ACT_CONTINUE_SCAN   0
#define EOB_ACT_END_OF_FILE   1
#define EOB_ACT_LAST_MATCH   2
#define YY_LESS_LINENO(n)
#define yyless(n)
#define unput(c)   yyunput( c, (yytext_ptr) )
#define YY_TYPEDEF_YY_SIZE_T
#define YY_STRUCT_YY_BUFFER_STATE
#define YY_BUFFER_NEW   0
#define YY_BUFFER_NORMAL   1
#define YY_BUFFER_EOF_PENDING   2
#define YY_CURRENT_BUFFER
#define YY_CURRENT_BUFFER_LVALUE   (yy_buffer_stack)[(yy_buffer_stack_top)]
#define YY_FLUSH_BUFFER   stat_flush_buffer(YY_CURRENT_BUFFER )
#define yy_new_buffer   stat_create_buffer
#define yy_set_interactive(is_interactive)
#define yy_set_bol(at_bol)
#define YY_AT_BOL()   (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
#define yytext_ptr   stattext
#define YY_DO_BEFORE_ACTION
#define YY_NUM_RULES   12
#define YY_END_OF_BUFFER   13
#define REJECT
#define yymore()   yymore_used_but_not_detected
#define YY_MORE_ADJ   0
#define YY_RESTORE_YY_MORE_OFFSET
#define YY_NO_UNPUT   1
#define YY_DECL   int statlex (YYSTYPE *yylval)
#define INITIAL   0
#define YY_EXTRA_TYPE   void *
#define YY_READ_BUF_SIZE   8192
#define ECHO   (void) fwrite( stattext, statleng, 1, statout )
#define YY_INPUT(buf, result, max_size)
#define yyterminate()   return YY_NULL
#define YY_START_STACK_INCR   25
#define YY_FATAL_ERROR(msg)   yy_fatal_error( msg )
#define YY_DECL_IS_OURS   1
#define YY_DECL   int statlex (void)
#define YY_USER_ACTION
#define YY_BREAK   break;
#define YY_RULE_SETUP   YY_USER_ACTION
#define YY_EXIT_FAILURE   2
#define yyless(n)
#define YYTABLES_NAME   "yytables"

Typedefs

typedef signed char flex_int8_t
typedef short int flex_int16_t
typedef int flex_int32_t
typedef unsigned char flex_uint8_t
typedef unsigned short int flex_uint16_t
typedef unsigned int flex_uint32_t
typedef struct yy_buffer_stateYY_BUFFER_STATE
typedef unsigned int yy_size_t
typedef unsigned char YY_CHAR
typedef int yy_state_type

Functions

void statrestart (FILE *input_file)
 Immediately switch to a different input stream.
void stat_switch_to_buffer (YY_BUFFER_STATE new_buffer)
 Switch to a different input buffer.
YY_BUFFER_STATE stat_create_buffer (FILE *file, int size)
 Allocate and initialize an input buffer state.
void stat_delete_buffer (YY_BUFFER_STATE b)
 Destroy the buffer.
void stat_flush_buffer (YY_BUFFER_STATE b)
 Discard all buffered characters.
void statpush_buffer_state (YY_BUFFER_STATE new_buffer)
 Pushes the new state onto the stack.
void statpop_buffer_state (void)
 Removes and deletes the top of the stack, if present.
YY_BUFFER_STATE stat_scan_buffer (char *base, yy_size_t size)
 Setup the input buffer state to scan directly from a user-specified character buffer.
YY_BUFFER_STATE stat_scan_string (yyconst char *yystr)
 Setup the input buffer state to scan a string.
YY_BUFFER_STATE stat_scan_bytes (yyconst char *yybytes, int _yybytes_len)
 Setup the input buffer state to scan the given bytes.
void * statalloc (yy_size_t)
void * statrealloc (void *, yy_size_t)
void statfree (void *)
int statwrap (void)
int statlex (void)
 if (!(yy_init))
 while (1)
int isatty (int)
int statget_lineno (void)
 Get the current line number.
FILE * statget_in (void)
 Get the input stream.
FILE * statget_out (void)
 Get the output stream.
int statget_leng (void)
 Get the length of the current token.
char * statget_text (void)
 Get the current token.
void statset_lineno (int line_number)
 Set the current line number.
void statset_in (FILE *in_str)
 Set the input stream.
void statset_out (FILE *out_str)
int statget_debug (void)
void statset_debug (int bdebug)
int statlex_destroy (void)
void stat_scanner_set_debug ()

Variables

int statleng
FILE * statin = (FILE *) 0
FILE * statout = (FILE *) 0
int statlineno = 1
char * stattext
int stat_flex_debug = 0
YY_DECL register yy_state_type yy_current_state
 The main scanner function which does all the work.
register char * yy_cp
register char * yy_bp
register int yy_act

Define Documentation

#define BEGIN   (yy_start) = 1 + 2 *
#define ECHO   (void) fwrite( stattext, statleng, 1, statout )

Referenced by while().

#define EOB_ACT_CONTINUE_SCAN   0

Referenced by while().

#define EOB_ACT_END_OF_FILE   1

Referenced by while().

#define EOB_ACT_LAST_MATCH   2

Referenced by while().

#define FLEX_SCANNER
#define INITIAL   0

Referenced by while().

#define INT16_MAX   (32767)
#define INT16_MIN   (-32767-1)
#define INT32_MAX   (2147483647)
#define INT32_MIN   (-2147483647-1)
#define INT8_MAX   (127)
#define REJECT
Value:
{ \
*yy_cp = (yy_hold_char); /* undo effects of setting up stattext */ \
yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
++(yy_lp); \
goto find_rule; \
}

Referenced by while().

#define UINT16_MAX   (65535U)
#define UINT32_MAX   (4294967295U)
#define UINT8_MAX   (255U)
#define unput (  )     yyunput( c, (yytext_ptr) )
 
#define YY_AT_BOL (  )     (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
#define YY_BREAK   break;

Referenced by while().

#define YY_BUF_SIZE   16384

Referenced by if(), and statrestart().

#define YY_BUFFER_EOF_PENDING   2
#define YY_BUFFER_NEW   0
#define YY_BUFFER_NORMAL   1

Referenced by while().

#define YY_CURRENT_BUFFER
Value:
( (yy_buffer_stack) \
                          ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
                          : NULL)

Referenced by if(), stat_delete_buffer(), stat_flush_buffer(), stat_switch_to_buffer(), statlex_destroy(), statpop_buffer_state(), statpush_buffer_state(), and statrestart().

#define YY_CURRENT_BUFFER_LVALUE   (yy_buffer_stack)[(yy_buffer_stack_top)]
#define YY_DECL   int statlex (void)
#define YY_DECL   int statlex (YYSTYPE *yylval)
#define YY_DECL_IS_OURS   1
#define YY_DO_BEFORE_ACTION
Value:
(yytext_ptr) = yy_bp; \
        statleng = (size_t) (yy_cp - yy_bp); \
        (yy_hold_char) = *yy_cp; \
        *yy_cp = '\0'; \
        (yy_c_buf_p) = yy_cp;

Referenced by while().

#define YY_END_OF_BUFFER   13

Referenced by while().

#define YY_END_OF_BUFFER_CHAR   0
#define YY_EXIT_FAILURE   2
#define YY_EXTRA_TYPE   void *
#define YY_FATAL_ERROR ( msg   )     yy_fatal_error( msg )
#define YY_FLEX_MAJOR_VERSION   2
#define YY_FLEX_MINOR_VERSION   5
#define YY_FLEX_SUBMINOR_VERSION   33
#define YY_FLUSH_BUFFER   stat_flush_buffer(YY_CURRENT_BUFFER )
#define YY_INPUT ( buf,
result,
max_size   ) 
Value:
if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
                { \
                int c = '*'; \
                size_t n; \
                for ( n = 0; n < max_size && \
                             (c = getc( statin )) != EOF && c != '\n'; ++n ) \
                        buf[n] = (char) c; \
                if ( c == '\n' ) \
                        buf[n++] = (char) c; \
                if ( c == EOF && ferror( statin ) ) \
                        YY_FATAL_ERROR( "input in flex scanner failed" ); \
                result = n; \
                } \
        else \
                { \
                errno=0; \
                while ( (result = fread(buf, 1, max_size, statin))==0 && ferror(statin)) \
                        { \
                        if( errno != EINTR) \
                                { \
                                YY_FATAL_ERROR( "input in flex scanner failed" ); \
                                break; \
                                } \
                        errno=0; \
                        clearerr(statin); \
                        } \
                }\
\
#define YY_INT_ALIGNED   short int
#define YY_LESS_LINENO (  ) 
#define YY_MORE_ADJ   0

Referenced by while().

#define yy_new_buffer   stat_create_buffer
#define YY_NEW_FILE   statrestart(statin )

Referenced by while().

#define YY_NO_UNPUT   1
#define YY_NULL   0
#define YY_NUM_RULES   12
#define YY_READ_BUF_SIZE   8192
#define YY_RESTORE_YY_MORE_OFFSET

Referenced by while().

#define YY_RULE_SETUP   YY_USER_ACTION

Referenced by while().

#define YY_SC_TO_UI (  )     ((unsigned int) (unsigned char) c)

Referenced by while().

#define yy_set_bol ( at_bol   ) 
Value:
{ \
        if ( ! YY_CURRENT_BUFFER ){\
        statensure_buffer_stack (); \
                YY_CURRENT_BUFFER_LVALUE =    \
            stat_create_buffer(statin,YY_BUF_SIZE ); \
        } \
        YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
        }
#define yy_set_interactive ( is_interactive   ) 
Value:
{ \
        if ( ! YY_CURRENT_BUFFER ){ \
        statensure_buffer_stack (); \
                YY_CURRENT_BUFFER_LVALUE =    \
            stat_create_buffer(statin,YY_BUF_SIZE ); \
        } \
        YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
        }
#define YY_START   (((yy_start) - 1) / 2)

Referenced by while().

#define YY_START_STACK_INCR   25
#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))

Referenced by if().

#define YY_STATE_EOF ( state   )     (YY_END_OF_BUFFER + state + 1)

Referenced by while().

#define YY_STRUCT_YY_BUFFER_STATE
#define YY_TYPEDEF_YY_BUFFER_STATE
#define YY_TYPEDEF_YY_SIZE_T
#define YY_USER_ACTION
#define yyconst
#define yyless (  ) 
Value:
do \
                { \
                /* Undo effects of setting up stattext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
                stattext[statleng] = (yy_hold_char); \
                (yy_c_buf_p) = stattext + yyless_macro_arg; \
                (yy_hold_char) = *(yy_c_buf_p); \
                *(yy_c_buf_p) = '\0'; \
                statleng = yyless_macro_arg; \
                } \
        while ( 0 )
#define yyless (  ) 
Value:
do \
                { \
                /* Undo effects of setting up stattext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
                *yy_cp = (yy_hold_char); \
                YY_RESTORE_YY_MORE_OFFSET \
                (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
                YY_DO_BEFORE_ACTION; /* set up stattext again */ \
                } \
        while ( 0 )
 
#define yymore (  )     yymore_used_but_not_detected
#define YYSTATE   YY_START
#define YYTABLES_NAME   "yytables"
 
#define yyterminate (  )     return YY_NULL

Referenced by while().

#define yytext_ptr   stattext

Referenced by while().


Typedef Documentation

typedef short int flex_int16_t
typedef int flex_int32_t
typedef signed char flex_int8_t
typedef unsigned short int flex_uint16_t
typedef unsigned int flex_uint32_t
typedef unsigned char flex_uint8_t
typedef unsigned char YY_CHAR
typedef unsigned int yy_size_t
typedef int yy_state_type

Function Documentation

int isatty ( int   ) 
YY_BUFFER_STATE stat_create_buffer ( FILE *  file,
int  size 
)

Allocate and initialize an input buffer state.

Parameters:
file A readable stream.
size The character buffer size in bytes. When in doubt, use YY_BUF_SIZE.
Returns:
the allocated buffer state.

References statalloc(), yy_buffer_state::yy_buf_size, yy_buffer_state::yy_ch_buf, YY_FATAL_ERROR, and yy_buffer_state::yy_is_our_buffer.

Referenced by if(), and statrestart().

void stat_delete_buffer ( YY_BUFFER_STATE  b  ) 
void stat_flush_buffer ( YY_BUFFER_STATE  b  ) 

Discard all buffered characters.

On the next scan, YY_INPUT will be called.

Parameters:
b the buffer state to be flushed, usually YY_CURRENT_BUFFER.

References yy_buffer_state::yy_at_bol, yy_buffer_state::yy_buf_pos, YY_BUFFER_NEW, yy_buffer_state::yy_buffer_status, yy_buffer_state::yy_ch_buf, YY_CURRENT_BUFFER, YY_END_OF_BUFFER_CHAR, and yy_buffer_state::yy_n_chars.

YY_BUFFER_STATE stat_scan_buffer ( char *  base,
yy_size_t  size 
)

Setup the input buffer state to scan directly from a user-specified character buffer.

Parameters:
base the character buffer
size the size in bytes of the character buffer
Returns:
the newly allocated buffer state object.

References stat_switch_to_buffer(), statalloc(), yy_buffer_state::yy_at_bol, yy_buffer_state::yy_buf_pos, yy_buffer_state::yy_buf_size, YY_BUFFER_NEW, yy_buffer_state::yy_buffer_status, yy_buffer_state::yy_ch_buf, YY_END_OF_BUFFER_CHAR, YY_FATAL_ERROR, yy_buffer_state::yy_fill_buffer, yy_buffer_state::yy_input_file, yy_buffer_state::yy_is_interactive, yy_buffer_state::yy_is_our_buffer, and yy_buffer_state::yy_n_chars.

Referenced by stat_scan_bytes().

YY_BUFFER_STATE stat_scan_bytes ( yyconst char *  yybytes,
int  _yybytes_len 
)

Setup the input buffer state to scan the given bytes.

The next call to statlex() will scan from a copy of bytes.

Parameters:
bytes the byte buffer to scan
len the number of bytes in the buffer pointed to by bytes.
Returns:
the newly allocated buffer state object.

References stat_scan_buffer(), statalloc(), YY_END_OF_BUFFER_CHAR, YY_FATAL_ERROR, and yy_buffer_state::yy_is_our_buffer.

Referenced by stat_scan_string().

YY_BUFFER_STATE stat_scan_string ( yyconst char *  yystr  ) 

Setup the input buffer state to scan a string.

The next call to statlex() will scan from a copy of str.

Parameters:
str a NUL-terminated string to scan
Returns:
the newly allocated buffer state object.
Note:
If you want to scan bytes that may contain NUL values, then use stat_scan_bytes() instead.

References stat_scan_bytes().

void stat_scanner_set_debug ( void   ) 
void stat_switch_to_buffer ( YY_BUFFER_STATE  new_buffer  ) 

Switch to a different input buffer.

Parameters:
new_buffer The new input buffer.

References YY_CURRENT_BUFFER, and YY_CURRENT_BUFFER_LVALUE.

Referenced by stat_scan_buffer().

void * statalloc ( yy_size_t  size  ) 
void statfree ( void *  ptr  ) 
int statget_debug ( void   ) 
FILE* statget_in ( void   ) 

Get the input stream.

References statin.

int statget_leng ( void   ) 

Get the length of the current token.

References statleng.

int statget_lineno ( void   ) 

Get the current line number.

FILE* statget_out ( void   ) 

Get the output stream.

References statout.

char* statget_text ( void   ) 

Get the current token.

int statlex ( void   ) 
void statpop_buffer_state ( void   ) 

Removes and deletes the top of the stack, if present.

The next element becomes the new top.

References stat_delete_buffer(), YY_CURRENT_BUFFER, and YY_CURRENT_BUFFER_LVALUE.

Referenced by statlex_destroy().

void statpush_buffer_state ( YY_BUFFER_STATE  new_buffer  ) 

Pushes the new state onto the stack.

The new state becomes the current state. This function will allocate the stack if necessary.

Parameters:
new_buffer The new state.

References YY_CURRENT_BUFFER, and YY_CURRENT_BUFFER_LVALUE.

void * statrealloc ( void *  ptr,
yy_size_t  size 
)
void statrestart ( FILE *  input_file  ) 

Immediately switch to a different input stream.

Parameters:
input_file A readable stream.
Note:
This function does not reset the start condition to INITIAL .

References stat_create_buffer(), statin, YY_BUF_SIZE, YY_CURRENT_BUFFER, and YY_CURRENT_BUFFER_LVALUE.

void statset_debug ( int  bdebug  ) 
void statset_in ( FILE *  in_str  ) 

Set the input stream.

This does not discard the current input buffer.

Parameters:
in_str A readable stream.
See also:
stat_switch_to_buffer

References statin.

void statset_lineno ( int  line_number  ) 

Set the current line number.

Parameters:
line_number 
void statset_out ( FILE *  out_str  ) 

References statout.

int statwrap ( void   ) 

Referenced by while().


Variable Documentation

int stat_flex_debug = 0
FILE * statin = (FILE *) 0
int statleng

Referenced by statget_leng().

int statlineno = 1
FILE * statout = (FILE *) 0

Referenced by if(), statget_out(), and statset_out().

char * stattext
register int yy_act
register char * yy_bp
register char* yy_cp
YY_DECL register yy_state_type yy_current_state

The main scanner function which does all the work.